|
Post by EdgeE on Jul 22, 2010 6:43:53 GMT -5
Hope I was not one of the 4-5, as I can not make it Sunday. Looks like I won't even get a ride in this weekend.
|
|
|
Post by JIMMYC on Jul 22, 2010 7:48:50 GMT -5
i'll be out of town next two weekends. i'll try to get in on the next work party. thanks in advance for doing it.
|
|
|
Post by breynolds on Jul 22, 2010 14:53:09 GMT -5
I'm available. Count me in if there's still room!
|
|
|
Post by seenvic on Jul 22, 2010 15:13:55 GMT -5
I'm available. Count me in if there's still room! There is always room. Going to meet at the intersection of Price Mill Rd and FS617. Will only be Mark Y, Dustin, Richard A, Jason and Brian. I'd run the other DR now from 617A, end of the trail. One DR and one hedger goes there. We could use one more person now, ideally.
|
|
|
Post by money on Jul 22, 2010 16:19:32 GMT -5
Count me and my nine year old daughter in. I asked her if she wanted to go to church, or a work day in the woods. Her answer "The Woods!!!!!!!!"
|
|
|
Post by seenvic on Jul 22, 2010 20:19:27 GMT -5
Count me and my nine year old daughter in. I asked her if she wanted to go to church, or a work day in the woods. Her answer "The Woods!!!!!!!!" I've always said trial work is a WWJD moment. Thank you very much.
|
|
|
Post by jtaylor on Jul 23, 2010 11:25:41 GMT -5
I'll be there; let me know if I need to run the chainsaw.
|
|
|
Post by bikerpanda on Jul 23, 2010 13:23:29 GMT -5
i can attend for this. I just need to know where to be or an address to map quest. I dont know what I will need or is expected but I can follow directions and I know how to use mowers, loopers, chainsaws, and lawn equipment.
jeffsmith438 at yahoo dot com I dont have a home computer but I will get it on my blackberry. I can help tomorrow or Sunday.
edited: email address so the spambots don't pick it up
|
|
|
Post by seenvic on Jul 23, 2010 14:13:30 GMT -5
Sounds like another good workday is coming together.
Plan is in place.
Meeting place is the the intersection of Price Mill Rd and FS 617. This is in Parksville, SC for those who may google it. 7am there.
|
|
|
Post by Mark Y on Jul 23, 2010 14:14:05 GMT -5
Go up HWY 28 to Parksville. Turn right on Price's Mill Road and go until you pass Price's Mill, and FS 617 is the next gravel road on your right maybe a mile past that bridge. We are meeting at that intersection @ 0700.
|
|
|
Post by jp3 on Jul 23, 2010 15:31:29 GMT -5
I should be able to make the work party Sunday morning.
|
|
|
Post by seenvic on Jul 25, 2010 19:26:52 GMT -5
How did it go?
|
|
|
Post by azdrawdy on Jul 25, 2010 20:07:25 GMT -5
The trailer disappeared Saturday afternoon, and reappeared this afternoon. Hope all went well.
MD
|
|
|
Post by Mark Y on Jul 25, 2010 21:22:06 GMT -5
The trailer disappeared Saturday afternoon, and reappeared this afternoon. Hope all went well. MD Glad you were paying attention. Now I know I shouldn't drag that 5th wheel out..... Work party went as well as expected for the heat/humidity; most of us were wilted by 11. I think everything is 100% on the last two miles, but we had a DR breakdown on the "5 mile left" section. There is still some to be done there, and we did not touch Wine. All of the trees were taken out. A walk through with hedgers from one mile to five mile could wind it up. Before the next work party, a drive by by someone who has a good eye for this stuff to suss out what remains to tidy up would be good. One more day and Wine/Turkey will be good to go. I would like to thank everyone that showed today. I would name them; but I'm afraid somebody would be left out.
|
|
|
Post by jtaylor on Jul 30, 2010 8:56:33 GMT -5
Sorry for the delay- work party members at Turkey on the 25th were (excuse the spelling as some are hard to read) Richard Allewelt, Brian Reynolds, Jeff Smith, Kyle Olack, Mark Yarbrough, Robert Yarbrough, John Burnham, McKenzie Weekley, John Weekley, John Pilcher, and Jon Taylor.
I now have the third hedge trimmer.
|
|